New build for me...

Page 15 of 19 Previous  1 ... 9 ... 14, 15, 16, 17, 18, 19  Next

Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by 4hams on Fri Mar 18, 2011 4:29 pm

WOW!
I am impressed with the quality of the build because I have been able to watch the build from start to finish.

And I am very happy for you!

You will have to install the motherboard software or drivers I mean for the 6GB's controller to work I believe? But not familiar with your board?

I am sure you will get it sorted shortly.

Thanks again for sharing this build with us.

I feel myself going into build withdrawl as I type...
4hams
4hams
Old Father Time
Old Father Time

Posts : 2708
Join date : 2010-02-06
Location : Ontario, Canada

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Fri Mar 18, 2011 4:32 pm

I already have an offer for the rig...maybe I will have to build another one. Hmm...
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by smduff on Fri Mar 18, 2011 4:55 pm

Don't forget to tac on an extra 1500 for labour, that wat you can go 3 way SLI in the next build LOL. Looking really good let us know how you make out with the other HDD's.
smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 46
Location : Canukland

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by Steve on Fri Mar 18, 2011 4:57 pm

Just freaking AWESOME Savage! Well Done!!! drink
Steve
Steve
Respected Forum Idividuals
Respected Forum Idividuals

Posts : 949
Join date : 2010-02-20
Age : 108
Location : Northern Calif. USA

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Fri Mar 18, 2011 5:00 pm

Thanks guys...I'm not selling it! At least not until I could build another one...I think my cousin got a little gun shy when he asked how much it was. I told him if he didn't know, then he should got to BestBuy and buy a shelf unit :Kewl:
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by Vinman on Fri Mar 18, 2011 5:48 pm

I'm a little late to the party but better late then never just went through all the posts in this tread Wow! extremely nice build you have there it looks awesome Nice work my friend!
Vinman
Vinman
DVD Ranger Support Admin
DVD Ranger Support Admin

Posts : 191
Join date : 2010-02-21
Age : 78
Location : California

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Fri Mar 18, 2011 5:53 pm

TY, Vinman!
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by bob2701 on Fri Mar 18, 2011 6:49 pm

Congrats Savage, excellent job.

You might right click on Computer and go to manage and then disk management to format your drives.
bob2701
bob2701
Respected Forum Idividuals
Respected Forum Idividuals

Posts : 1474
Join date : 2010-03-04
Age : 78
Location : Jersey Shore

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Fri Mar 18, 2011 7:13 pm

I have to see them in bios first...I just found new drivers for them. Maybe this next reboot will find them!
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by bob2701 on Fri Mar 18, 2011 7:23 pm

Make sure they are seated all the way in the hot swap cage. You should see them in the bios.
bob2701
bob2701
Respected Forum Idividuals
Respected Forum Idividuals

Posts : 1474
Join date : 2010-03-04
Age : 78
Location : Jersey Shore

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by 4hams on Fri Mar 18, 2011 7:41 pm

There also may be a setting in the bios to enable them? On my P6758D Premium board they worked right out of the gate...

Sell it to your cousin so we can see what ya build next!!! :D:
4hams
4hams
Old Father Time
Old Father Time

Posts : 2708
Join date : 2010-02-06
Location : Ontario, Canada

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Fri Mar 18, 2011 10:04 pm

So I bypassed the hot swap bays and hooked them up to the 6.0GB/s ports direct with separate power supplies and they were seen in BIOS right away. Looks like I call Corsair Monday and get a new Hot Swap Board on the way...this one is no worky. Um, dammit :waiting:
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by smduff on Fri Mar 18, 2011 10:07 pm

did you run power to the hot swap bays?
smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 46
Location : Canukland

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Fri Mar 18, 2011 10:25 pm

yeah...the SSD ran fine. You can only run one power wire to the hot swap bays. In theory it is nice because one power supplies the 4 bays. I just removed the board completely and hooked up direct to the hot swap bays. They are both showing up now. The only change is I bypassed (removed) the hot swap bay connection board and ghetto wired the hot swap bays.New build for me... - Page 15 939831418_photobucket_24672_
This is the board that needs to be RMA'd for any 800D owners out there trolling this thread.
New build for me... - Page 15 939831418_photobucket_24673_
You can ghetto wire the drives by removing the board and just hooking up to the back of the hot swap tray. Just don't try and remove the tray! Sometimes you just have to improvise...
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by smduff on Fri Mar 18, 2011 10:46 pm

Very cool looks good even gheto'ed up LOL
smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 46
Location : Canukland

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by bob2701 on Sat Mar 19, 2011 7:06 am

As soon as you said they were not showing up in the bios it had to be the connections or the board. I just replaced the Sata II boards (which were very erratic) with the new Sata III board. Working now but since you have had a problem I will keep an eye on it. I use the hot swap feature all the time to switch drives for my movie collection.

Glad you were able to get them working. Now you are up to #2 RMA!! Bummer.
bob2701
bob2701
Respected Forum Idividuals
Respected Forum Idividuals

Posts : 1474
Join date : 2010-03-04
Age : 78
Location : Jersey Shore

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by 4hams on Sat Mar 19, 2011 9:05 am

Well that sucks hope they get you fixed up soon! But as Duff said it looks pretty good anyways!
4hams
4hams
Old Father Time
Old Father Time

Posts : 2708
Join date : 2010-02-06
Location : Ontario, Canada

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Mon Mar 21, 2011 12:30 pm

I'll post some screens when the GPU test is through, but I ran the OCCT CPU test for an hour on high and the highest temp was 49 degree Celsius. So far the GPU loop is up to 52 degrees Celsius after 30 minutes. In both tests the fans on the radiators were set to 1/2 way so I think I am in good shape temp wise. Going to really have fun pushing this rig. 4 GHz...likely 5.
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by smduff on Mon Mar 21, 2011 12:34 pm

Run LinX as your CPU stress test OCCT is a week program. For the GPU's run Furmark.
smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 46
Location : Canukland

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Mon Mar 21, 2011 12:38 pm

link me?
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Mon Mar 21, 2011 12:39 pm

edit: found it @ xtremesystems
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by smduff on Mon Mar 21, 2011 12:48 pm

smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 46
Location : Canukland

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Mon Mar 21, 2011 12:53 pm

I found that...how do you install that LinX?
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by smduff on Mon Mar 21, 2011 12:56 pm

Put the folder where you want it and create a short cut to the desktop.
smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 46
Location : Canukland

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by SavageNFS on Mon Mar 21, 2011 1:02 pm

it must be a zip file I don't recognize or something...
SavageNFS
SavageNFS
Moderators
Moderators

Posts : 684
Join date : 2011-02-16
Age : 49
Location : Wisconsin

http://www.sandboxgamers.com

Back to top Go down

New build for me... - Page 15 Empty Re: New build for me...

Post by Sponsored content


Sponsored content


Back to top Go down

Page 15 of 19 Previous  1 ... 9 ... 14, 15, 16, 17, 18, 19  Next

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum