Overclocking a Q9550 info for Vinny

Go down

Overclocking a Q9550 info for Vinny Empty Overclocking a Q9550 info for Vinny

Post by 4hams on Sun Aug 08, 2010 11:37 am

Hey Vinny have a look at this info as it may or should help you with your system. It is not the identical board as yours but very close and should have most of the same bios settings.

Settings for Q9550 for 3.8ghz - Might not be possbile on every motherboard (all motherboards overclock differently). CPU should be capable.

Ai Overclock Tuner : Manual
CPU Ratio Setting : 8.5
FSB Frequency : 448
PCIE Frequency: 105
FSB Strap to North Bridge : Auto (p5q pro has some problems with straps)
DRAM Frequency: Auto, this will be set to 896Mhz (or change to the mhz of your memory)
DRAM Timing Control: Auto (adjust to your timings of your memory)

DRAM Static Read Control: Auto
Dram Read Training : Auto
MEM OC Charger : Auto
Ai Clock Twister : Auto
Ai Transaction Booster : Auto

CPU Voltage : Set what you need, this will range from 1.20-1.4v
CPU GTL Reference: Auto
CPU PLL Voltage : 1.6
FSB Termination Voltage: 1.30-1.40 (try 1.3, and if its not stable, raise it)
DRAM Voltage : 2.1
NB Voltage : 1.2-1.5v (quads are alot harder than dual cores to clock, the NB voltage helps with the higher FSB on quad)
PCIE Sata Voltage: Auto

Load Line Calabration : Enabled
CPU Sread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
CPU Clock Skew: Auto
MB Clock Skew: Auto

Read the full article Here.
4hams
4hams
Old Father Time
Old Father Time

Posts : 2708
Join date : 2010-02-06
Location : Ontario, Canada

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by Vinman on Sun Aug 08, 2010 9:08 pm

Thanks I am definitely going to over clock this computer when I finish my mod!
Thanks for the info!!

Vinman
Vinman
DVD Ranger Support Admin
DVD Ranger Support Admin

Posts : 191
Join date : 2010-02-21
Age : 77
Location : California

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by 4hams on Mon Aug 09, 2010 7:54 am

Hope it helps Vinny! smile:
4hams
4hams
Old Father Time
Old Father Time

Posts : 2708
Join date : 2010-02-06
Location : Ontario, Canada

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by McstylisT on Thu Aug 19, 2010 12:57 pm

Nice one 4hams :yourock:

_________________
McstylisT Administrator

MY I7 @ 4GHZ , 12GB DDR3 , 2x ATI 5770 CrossFire X SYSTEM



McstylisT
McstylisT
Admin
Admin

Posts : 822
Join date : 2010-02-02
Location : England , United Kingdom

http://mcstylists-overclock.forumotion.com

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by alan1476 on Sun Mar 27, 2011 6:20 pm

You guys are awesome. I wish I wasn't sick, I would be way more active in these forums, things have been hard for me lately, not monetarily but emotionally, my son is in college and I am alone and not feeling that well, after bringing up a son for 19 years without a wife, its very lonesome, so all you guys with familys, count your blessings.
alan1476
alan1476

Posts : 27
Join date : 2010-02-20
Age : 75

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by smduff on Mon Mar 28, 2011 1:43 am

I can send you mine alan LOL.
smduff
smduff
Admin
Admin

Posts : 1592
Join date : 2010-02-07
Age : 45
Location : Canukland

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by bob2701 on Mon Mar 28, 2011 6:35 am

I didn't check the date at first and thought that Craig had made an appearance. LOL

bob2701
bob2701
Respected Forum Idividuals
Respected Forum Idividuals

Posts : 1474
Join date : 2010-03-04
Age : 78
Location : Jersey Shore

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by alan1476 on Wed Mar 30, 2011 12:58 pm

smduff wrote:I can send you mine alan LOL.
I have a son but he is in college and I am alone for the first time in 19 years, its not a very warm feeling, but I always have my family here to fall back on. Alot of the members here have been like a cyber family to me here and on other forums for many years. We may not have ever met in person, but through telephone conversations and e-mails I feel we are a family. smile:
alan1476
alan1476

Posts : 27
Join date : 2010-02-20
Age : 75

Back to top Go down

Overclocking a Q9550 info for Vinny Empty Re: Overclocking a Q9550 info for Vinny

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum